Shredder Machines►STEP PacMaster VS

Shredder Machines

Suppliers

  • E3 Hallbrook

Facebook

STEP PacMaster Series

STEP PacMaster VS

41700020

New

STEP PacMaster VS is used for the manufacture of packaging pads made from corrugated board or other carton materials.

More details

56,200.00 DKK

STEP PacMaster VS 4x110 mm, 230V/50-60 Hz, D/F-plug

• Using the scale (12), set the guide (11) to the appropriate position for cutting corrugated into strips of the desired width (fig. 3).
• Feed corrugated materials to the auxiliary cutters via the inlet guide (fig. 4).
• Remove the pre-cut strips after processing is complete.

Specification
Model STEP PacMaster S 4x110 mm, 220 V/60 Hz, 3 phase, 4-pole 20 A STEP PacMaster VS 4x110 mm, 220- 240 V/50-60 Hz, D/F-plug
Weight approx. 176 kg approx. 205kg
Cutting Width 4 x 110mm 4 x 110mm
Cutting Capacity 2 layers cor. board quality ( max. thickness of cor. boards 18mm) 3 layers cor. board quality 3.1 ( max. thickness of cor. boards 18mm)
Inlet guide auxiliary cutter NA 20mm
Inlet guide, cutting system 15mm 20mm
Working width cutting system 425mm 425mm
Cutting speed 0,18 m/sec. 0.09- 0.29 m/sec.
Power consumption 3.9 kW 1.9 kW
Power output 2.2 kW 1.1 kW
Intermittent Service 24 min 30 min- 15 min
Supply voltage 400 V/ 50Hz, 230 V/50Hz,
415 V/50Hz, 220 V/60Hz
200 V/50Hz, 200 V/60Hz		 230 V/50Hz
240 V/50Hz
220 V/60Hz
Pre-fusing (gl fuse, type 1 assignment)
400V-415V:
200V-230V:		 16 A
25 A		 16 A
13 A
Width 685 mm 620 mm
Depth 470 mm 500 mm
Height 950 mm 1020 mm
Noise Level approx. 68.5 dB (A) approx. 68.5 dB (A)
Item No. 41700010  41700020

2 other products in the same category